BMW On-Board Computer Manual de Serviço Página 74

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 73
If an alarm was triggered while
the motorcycle was unattended,
the rider is notified accordingly
by an alarm tone sounding once
when the ignition is switched on.
The anti-theft alarm telltale light
then signals the reason for the
alarm for one minute.
The meanings of the flash codes
are as follows:
Flashes 1x: Motion sensor 1
Flashes 2x: Motion sensor 2
Flashes 3x: Ignition switched
on with unauthorized key
Flashes 4x: Disconnect of the
anti-theft alarm from the mo-
torcycle's battery
Flashes 5x: Motion sensor 3
Deactivation
Kill switch in operating position
(run).
Switch on the ignition.
Turn indicators flash once.
Confirmation tone sounds once
(if programmed).
Anti-theft alarm is deactivated.
Customising anti-theft
alarm settings
Switch on the ignition, or bring
the motorcycle to a stop.
Repeatedly press button 1
briefly until the top display line
displays 2 SETUP ENTER.
Press and hold button 1 to
start the SETUP menu.
Respectively press button 1
briefly to go to the next menu
item DWA.
In the top display line 2 DWA is
indicated.
The bottom display line 3
shows the preset value.
Press button 4 briefly in order
to change the set value.
The following settings are avail-
able:
On: The alarm system has
been activated or will be ac-
tivated automatically when the
ignition is switched.
4
72
z
Operation
Vista de página 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 183 184

Comentários a estes Manuais

Sem comentários