www.akrapovic.comInstallation instructions Akrapovič Exhaust SystemsRacing&Evolutionfor theBMW S1000RR 2010*502408*

www.akrapovic.com10Figure 13 Figure 14Unscrew all nuts from the front header tube anges (Figure 13).WARNING: make sure not to damage the radiator’s c

11Figure 15

www.akrapovic.com12Figure 16Figure 17INSTALLATION OF THE AKRAPOVIČ RACING OR EVOLUTION EXHAUST SYSTEMS:1. Set up and hand tighten the sleeves together

9.8Nm 7ftlb9.8Nm 7ftlb29Nm 22ftlb13Figure 18Figure 19Insert the middle header tubes all the way into the sleeves together, attach the sprin

www.akrapovic.com9.8Nm 7ftlb14Figure 20Figure 21Attach the radiator bracket onto the radiators (Figure 20).4.Insert the outer header tubes all the wa

15Figure 22Figure 23Slide the assembled link pipe and collectors onto the header tubes and attach the springs (Figure 23). WARNING: make sure, that s

www.akrapovic.com16Figure 24Figure 25For street legal Racing and Evolution only: remove the stock exhaust cables off the stock exhaust valve and inst

9.8Nm 7ftlb4.9Nm 3.6ftlb17For street legal Racing and Evolution only: set the cable adjusters on the middle of the cable bracket, as shown. Tighten th

www.akrapovic.com22 Nm 16 ftlb18Figure 28 12.Attach the additional Akrapovič stainless steel bracket to the stock right passenger footrest

Figure 3019Figure 31Correctly position the carbon-ber clamp and slide it onto the mufer - bear in mind the left offset of the carbon ber clamp view

www.akrapovic.com2Congratulations on purchasing an Akrapovič exhaust system. Please read these installation instructions carefully. If you have any tr

www.akrapovic.comFigure 32 22 Nm 16 ftlb20Figure 33Align the mufer in respect to the motorcycle and tighten the mufer clamp to the bracket, using Ak

Figure 342 Nm 1.4ftlb21Figure 35Assemble the cowlings in the reverse order from the order in which they were removed (Figure 35).WARNING: tighten all

www.akrapovic.com22IT IS NORMAL IF WHITE SMOKE COMES OUT OF THE MUFFLER ON FIRST OPERATION.DO NOT STAND BEHIND THE MUFFLER ON FIRST OPERATION. DO NOT

23

www.akrapovic.comP-HF284 M18/ M12 LAMBDA THREAD FITTING KITBMW S1000RR/ Complete exhaust system/ RACING LINE - open, model year: 2010 Product code:

P-HF284 M18/ M12 LAMBDA THREAD FITTING KITBMW S1000RR/ Complete exhaust system/ RACING LINE street legal, model year: 2010 Product code: S-B10R1C-H

www.akrapovic.comP-HF284 M18/ M12 LAMBDA THREAD FITTING KITBMW S1000RR/ Complete exhaust system/ RACING LINE open tube set with street legal muffler,

P-HF284 M18/ M12 LAMBDA THREAD FITTING KITBMW S1000RR/ Complete exhaust system/ RACING LINE open tube set with SO street legal muffler, model year: 2

www.akrapovic.com

3USE BOLT SEALANT; Apply 3 to 4 small drops of bolt sealant onto the cleaned and degreased threads before tightening the bolts. WARNING! Avoid contact

www.akrapovic.com4Figure 1 Figure 2REMOVAL OF STOCK EXHAUST SYSTEM:1.2.Put the motorcycle on a side stand, we recommend a racing stand.Unscrew the mar

5Figure 3Figure 4Unscrew both rider’s seat screws and remove the seat (Figure 3).4.Unscrew marked bolts and remove the fuel tank side covers on both s

www.akrapovic.com6Figure 5 Figure 6Remove the stock exhaust valve cables from servo motor (Figure 5). WARNING: do not turn the the servo motor wheel w

7Figure 7Figure 8Unscrew the marked bolts on both sides of the motorcycle and remove the lower and middle parts of the cowling (Figure 7, 8, 9).8.

www.akrapovic.com8Figure 9Figure 10 Pull the radiator’s bracket off the radiators (Figure 10).WARNING: make sure not to damage the radiator’s cooling

9Figure 11Figure 12Unscrew the radiator’s bracket off the engine block and both lambda sensors (Figure 11).10.Remove the header tubes valve cable from