Originally developed and published here by unknown author: http://members.cox.net/rlacm/IntakeIndex.htm
Recovered and published by BMW-Planet.com – May 2012
Fuel Lines
- Remove baggies and zip ties from four fuel lines and from hose at left-rear of
fuel pipe. Install fuel lines (on my motor the ends of the hoses with the yellow
marks connected to the car-side of the fuel system, red marks to engine side).
- Connect rubber hose from end of fuel pipe to fitting on upper-left corner of rear
intake manifold cover.
- Reinstall driver’s side cabin air duct.
Engine Cover Supports
- Using four 10mm bolts (A), install engine cover supports.
- Carefully connect red snap fitting at throttle cables.
Intake Flex line between MAF and ASC throttle body.
- Position flex hose between secondary throttle body, MAF, and intake resonator
chamber. While supporting resonator, press connector (B) on bottom of flex hose
into resonator until it snaps into place.
- Position and secure both ends of flex hose with hose clamps (A).
Comentários a estes Manuais